ECW XZ3Elevator Lifting Weighing Devices, Elevator Load Weighing
Parts Elevator Spare Parts ECW XZ3Elevator Lifting Weighing
Devices, Elevator Load Weighing Parts Elevator Spare Parts
One set including controller ECW-XZ3 and load sensor ECW-GB(Tension
sensor)
Application Range Being applicable to all traction elevators with fixed car platform
with the load of 500kg~3000kg
Landing Compensation Method Auto adapting intelligent fuzzy compensation
Sensitivity Elevator Rated Capacity/200 (Example: The rated capacity is 1000kg, and the
sensitivity is 5kg ) [This data may be affected by elevator mechanical performance.]
System Error ≤0.5% (5~40 centigrade )
Non-linearity ≤0.5%
Output Mode 1.2-channel programmable output modes are: No load, light load, semi full load, heavy load, rated
load, overload (customer may set the changing range freely).
2.Each channel can be programmed as dynamic Close or Open contact.
3.Contact Capacity: DC/AC 48V/100mA.
Analogue output :It performs linear change (0~10V) when Elevator load is changing
from “no load~rated load”.
Operation Ambient Temperature -20~55 centigrade centigrade
Relative Humidity Reaction 20%~90%RH
Reaction Time ≤0.3Second
Power Supply AC/DC24(±10%)V/200mA
Install Position Sensor Section:At the place of traction rope shackle
Controller Section:Control Cabinet in machineroom. See the attached
figure for installing dimensions.
Overall Size Sensor Section:See the figure;Controller Section:See the figure
M:The intension exceeding the limit parameters listed above may
result in the abnormality or permanent damage to the system.
Main Characteristics:
- Selecting directly-compressing“Disc”type load sensor,it is unnecessary to change the pull rod of traction rope shackle.
- Weighing range is wide (effective load of 500Kg~3000 Kg),high-accuracy position,intelligent temperature
- compensation.
- Inner core consists of highly accurate load sensor and high
performance single-chip micro-computer. All operation
- parameters can be set on field.
- System may do scientific calculation according to mathematical
equations with the function of no-load auto
- zeroing,automatically modifying measuring error.
- The capability of fuzzy compensation improves the requirement of
elevator for high accuracy weighing signals.
- Being provided with load setting or 20% or 100 rated load
autotuning sub-function under the
- condition of auto removing dead weight. It is easy to fulfill user’s requirements.
- Autotuning for on-site adjustment makes it easy to be adjusted.
- Having the function of operation parameters auto modification and
fuzzy landing compensation
- function.
- The whole shoot starts from users’ point of view,easy installation and adjustment,decreasing
- users’ additional cost in use,high ratio of performance to price.
- Load sensor ECW-GB Install mothed as the pictuer show here:
- Other products show:
